Tag: soft silicone hydrogels

Using a Customized Soft Lens

[us_post_title]

Sometimes ‘flat out’ the best option for a flat eye

[us_post_date]

By Gerard Smits

Introduction

The vast majority of the lenses we fit in contact lens practice are soft lenses. The amount of attention that goes into ‘fitting’ soft lenses is limited in contrast to the focus on scleral lens fitting, corneal lens fitting, and orthokeratology, for instance. This case shows how taking control of the fitting process can sometimes enhance someone’s life and upgrade one’s vision in relation to quality of life. 

Subjective

Mary came to our practice right in the heart of Amsterdam in the Netherlands. Her wish was to wear lenses in addition to the glasses that she used, with a preference for daily disposables if possible. The anamneses did not reveal any specific considerations or limitations for fitting with a soft lens. Patient complains of moderate dry eye symptoms.

Objective

General slit lamp examination revealed no abnormalities. We focus on the right eye of the patient for this case report. Refraction of the right eye came down to S+2.75, with a corneal diameter (white-to-white with the Medmont topographer) of 12.0mm with an overall average eccentricity of over four quadrants of 0.43.

In our contact lens practice, emphasis is on the shape of the entire anterior ocular surface, not just the central cornea. We use a Medmont corneal topographer for this reason, but with a special tool: the E-H software¹. 

Based on the overall corneal topography using that instrument, combined with the peripheral corneal angle measured with the topographer and using the sagittal height calculator – the overall sagittal height of the ocular surface (OC-SAG) over 15mm can be estimated, typically the horizontal meridian values are used.

In this case, the E-H 0-180° value 3524 microns. This figure is well below the OC-SAG of the average eye, which is estimated to be in the 3750 micron range. This eye also falls outside the one-standard deviation range (1-SD), which is between 3550-3950 microns.  

[us_separator][us_image image=”10467″ size=”us_768_0″ align=”center”][us_separator]

Assessment

The fact that this eye falls outside (on the left side) of the normal distribution bell-curve and even outside the 1-SD range – indicates that this is an exceptionally flat eye. Based on keratometry values alone (8.09/7.88) it is not easy to make the same judgement, especially as the eye has an average e-value and standard corneal diameter. In cases like this, measuring the full ocular surface over at least the diameter of the soft lens (or the benchmark 15mm is used as a standard often) can be very insightful. 

For this patient, several standard soft lenses were tried, including Dailies Aqua Comfort Plus (Alcon) BC 8.70 Ø 14.0, Clariti 1 Day (CooperVision) BC 8.60 Ø 14.1, Dailies All Day Comfort BC 8.60 Ø 13.80 and monthly disposable Biofinity (Alcon) BC8.60 Ø 14.0 and Fresh Excellent (Microlens/Wölk) BC 8.3 Ø 13.6. All lenses failed because of lack of movement and mobility, in addition to poor comfort.

Plan

Patient ultimately was refitted with a custom soft lens based on the patient’s corneal topography. The Medmont file was­­­ uploaded to the manufacturer and an individual monthly disposable silicone hydrogel lens was created for this patient. The Indivisual (Menicon, Emmen NL) was manufactured in the Definitive 74 material (Efrofilcon A V3) with a sagittal height of the lens (CL-SAG) of 2900 micron and a tangential peripheral shape (tangent angle 54°) S+2.50 in a Ø 14.1. 

The lens design is similar to how many scleral lens designs are configured these days. The lens fit procedure would also be close to fitting a scleral lens: changing the tangent angle would ‘lift’ the lens, decreasing the lens to a lower sagittal height. For this patient, this lens design resulted in an optimal lens fit with excellent movement – which is believed to be the result of the tangential peripheral shape of the lens in conjunction with the customized CL-SAG height. 

In Summary

Using the overall sagittal height of the ocular surface over a 15mm chord can give the eye care practitioner (ECP) valuable information about when to start with a flat or steep lens (a low or high CL-SAG) using the Pacific University SAG-charts, or when to divert to an out-of standard or a customized lens – like in this case. This will save time, on behalf of the patient and the ECP, from fewer trial lenses used and increased overall satisfaction. Consequently, this can potentially prevent drop-out of soft lens wear. 

The initial lens type requested by the patient, daily disposables, come in a variety of brands but are limited in size and parameters. It is the task of the ECP to assess and decide which lens is suitable for a given eye and which is not. This case perfectly illustrates the decision-making process, and a custom-made lens in a silicone hydrogel material with a monthly replacement schedule is the ideal solution for the patient. The patient still desires a daily disposable lens, if possible, but that is not feasible in this case. As ECPs we must be clear about this. In regard to the patient’s complaint of moderate dry eye symptoms – as ECPs we must be careful with that. Any form and type of eye discomfort can be easily mistaken for dry eye. But often, lens fit pro­­blems are partially or fully the root cause of discomfort issues, and lens fit issues need to be addressed first. The ‘take-home message’ in this case was pretty obvious: a flat lens for this flat eye was the best technical option for this patient.  

¹the E-H tool in the Medmont topographer can be added simply, using the manufacturer’s guidelines. 

This case study is part of a series focusing on speciality soft lens fitting. Stay tuned for the next installment coming soon. Special thanks to Eef van der Worp for bringing this series together.

[us_separator show_line=”1″ size=”small”]
[us_image image=”10495″ size=”us_600_0″ has_ratio=”1″ ratio=”3×4″]
[us_separator size=”small”]

Gerard comes from a long line of opticians (grandparents, father and brother are all opticians). He graduated from the Christiaan Huygenschool (optics) in Rotterdam, and started working as a contact lens specialist in 1985. Since then he has been a member of the ANVC (Dutch Contact Lens Association). He has specialized in both rigid and soft lens fitting and has worked as a consultant for many industry partners, and tested different (specialty) lenses in his practice for the industry. He works as Ralph Optiek in the center of Amsterdam. His experience includes specialty lenses, such as orthokeratology, rigid corneal lenses after refractive surgery and fitting of custom soft lenses. Customization of lens fiting using corneal topography data and multifocal (rigid corneal and soft) lens fitting are two of the main challenges, but also opportunities he sees for your profession.

[us_separator size=”small” show_line=”1″]
[us_post_navigation in_same_term=”1″]
[us_sharing providers=”facebook,twitter,linkedin” align=”right”]
Tags: , , , , , , ,

Taking Back Control of Myopia Management

[us_post_title][us_post_date]

By Martin Conway

I have been spending a lot of my time lately on the expanding development of scleral lenses and, with that, the need for educational resources to support their increased use. I suppose that the satisfaction one gets from seeing an improvement in comfort, visual acuity and quality of life for a patient that has struggled for sometimes years with other options is immediate and, in some ways gives a sense of satisfaction that is not present when one considers myopia management.

This is a new term that has replaced the use of myopia control. The word “control” confers the notion that we can predict the outcome for something that has not yet occurred, and whilst there may be indicators that a given child is heading towards becoming more myopic, we have not been able to guarantee to parents that the treatment we recommend has a predictable outcome.

As a result of the increased research activity over the past decade or so, we are now able to see the results of various treatment options and so maybe we can discuss those options with a degree of confidence that was perhaps missing previously.

Clinical Studies are published sporadically and, for the average practitioner, it can be difficult to put together each piece of the jigsaw puzzle into a coherent picture of what is actually happening.

Thankfully, there are experts in the field that collate all of the available information and arrange it in easily digestible forms for us all to broaden our knowledge base and improve our practice.

I recently came across two prime examples of this information. The first is a webinar by Jeff Walline on the GPLI website1, and the second is an infographic produced by the International Myopia Institute2.  I will leave the details of both at the end of this article.

From both the webinar and the infographic, it would appear that all currently available treatment options have similar effects on the progression of myopia in children. These options include Atropine, Novel Spectacle Lenses, Multifocal Soft Contact Lenses and Orthokeratology. (The use of Atropine is governed by regulatory bodies and is not available to all, so I will not discuss that option here).

We in the optical profession should be encouraged by the results of these studies. They clearly demonstrate that the addition of plus power in the periphery of a lens has an effect on eye growth and that this could be administered via spectacles, soft lenses or orthokeratology.

Initially, it might appear that the larger corporations are set to steal the show, with their larger marketing budgets and disposable options. Particularly so, as current research seems to indicate that there is little to choose between modalities as far as patient benefit is concerned.

Speciality lens manufacturers might view these results with dismay, but I view them differently. These results show that current modalities do go some way to slow progression, but they are well short of complete “control”. This leaves the possibility for both orthokeratology and custom soft lens manufacturers to refine their designs with the ultimate aim of stopping progression completely.

Most of the currently available lens designs, including moulded, orthokeratology and soft, are all based upon pre-existing designs for the correction of presbyopia or, in the case of orthokeratology, on single vision correction. The fact that they seem to have some effect on the progression of myopia is serendipitous.

With orthokeratology, plus at the periphery is determined by the patient’s prescription. A -1.00 dioptre early myope receives just +1.00 dioptre plus in the periphery, whereas a -4.00 dioptre myope receives +4.00.

We need to discover what the “sweet spot” is and ensure that each eye receives the precise amount of peripheral defocus in order for us to provide the best possible outcome for each patient.

As practitioners, we have developed our skills in measuring and then correcting optical aberrations. Simply adding as much plus as we can muster from a given appliance is not in our DNA.

We should look at where we are now as a starting point. New diagnostic tools are being developed that are capable of not only providing a defocus map similar to that of a topographer but also displaying defocus measurements across the fundus. This should allow for more tailored designs to be produced both in orthokeratology and in soft silicone hydrogels, in a way that moulded lens and spectacle lens manufacturers cannot.

Multinationals will continue to create awareness in the marketplace that individual speciality manufacturers simply cannot, and we should welcome that. On our part, we need to provide innovative designs backed by clinical studies that can supplement the mass-market products and improve our understanding of myopia progression, to the point that we can regain use of the title “Myopia Control”.


1. GPLI Webinar: Myopia Management Update by by Jeffrey J. Walline OD, PhD, FAAO. https://www.gpli.info/webinar-2021-08/
2. International Myopia Institute Facts and Findings Infographic: https://myopiainstitute.org/resources/
[us_separator size=”small” show_line=”1″]
[us_image image=”8848″]
[us_separator size=”small”]

Martin Conway has over 40 years’ experience in the contact lens field as a qualified Contact Lens Optician. He is registered with the UK General Optical Council on the Speciality Contact Lens Register. Martin is a fellow of the British Contact Lens Association (FBCLA), and The International Association of Contact Lens Educators (FIACLE). He has served in the Professional Services role as an educator and clinical adviser on behalf of both Sauflon and CIBA, and now acts as Professional Services Consultant for Contamac. Martin has lectured extensively in Europe, Asia, Russia, North and South America and the Middle East.

[us_separator show_line=”1″ size=”small”]
[us_post_navigation in_same_term=”1″]
[us_sharing providers=”facebook,twitter,linkedin” align=”right”]
Tags: , , , ,