Tag: custom scleral lenses

Mission: Education

[us_post_title]

BostonSight’s FitAcademy harnesses over 30 years of scleral lens innovation, fitting, management, and co-management to educate practitioners globally

[us_separator size=”small”][us_image align=”center” image=”10630″ size=”us_600_0″][us_post_date][us_separator size=”small”]

By Karen Carrasquillo, OD, PhD, FAAO, FSLS, FBCLA

At the core of BostonSight’s mission reside two fundamental pillars: innovation and education. As a non-profit organization, founded in the early 1990s (when there was still so much to learn about scleral lenses, especially after the advent of gas permeable polymers to manufacture these), sharing clinical knowledge and educating about the therapeutic benefits of scleral lenses was, and continues to be, a driving force and guiding light for the organization. 

Since the mid-1980s, one of the primary vessels to disseminate our clinical and research data has been via peer-reviewed publications.  So much so that BostonSight has been recognized in two bibliometric studies as the number one contributor of scleral lens peer-reviewed publications in the United States, and number two worldwide.1,2  Additionally, for the past 20 years, optometrists and ophthalmologists from all over the globe have come to BostonSight for in-person, immersive education in our own clinic. This has ranged from clinical shadowing to completing the intensive PROSE Fellowship, designed to address the most advanced cases of ocular surface disease. It has also included collaborations with the New England College of Optometry (NECO), MCPHS University College of Optometry, Massachusetts Eye and Ear Infirmary, and the Veteran Affairs Hospital System, all focused on developing and educating future generations of clinicians. 

Over the years, our educational evolution and goals have been to broaden the reach, increase the bandwidth, strengthen the impact, foster collaboration, and pass it forward. After almost twenty years of focusing primarily on clinical immersive, in-person education, the concept of FitAcademy™ was born in 2018. It started as a ‘pie in the sky’ concept, then a goal, and later became a reality. Could we transport, host, and “feed” Cornea and Contact Lens residents from all over the United States and Canada at little to no cost to them? Feeding not only their bodies but also their intellect with our 30+ years of knowledge on everything scleral lenses. The content would have a strong emphasis not only on the mechanics of scleral lens design, fitting, and troubleshooting, but an equal emphasis on the importance of management and co-management of complex corneal diseases.  The fortune of working alongside corneal specialists throughout the existence of BostonSight and treating some of the most complex and challenging corneal disease patients allowed us to learn early on that to be successful with scleral lenses, practitioners need to see the big picture, need to learn about ocular surface disease management and co-management, need to know how to collaborate and how to communicate with referring specialists, and need to learn how to manage complications beyond the fit. This is how the phrase “it’s not just about the piece of plastic” came to be; coined by our corneal specialist and medical director ca. 2008.  Additionally, as pioneers in the field and innovators in lens designs, having acquired a wealth of knowledge on scleral lens design and troubleshooting, it was only fitting (no pun intended!) to share more broadly our knowledge with a wider audience and further our mission of education. And so, FitAcademy™ was launched, expanding our reach to the entire Cornea and Contact Lens Residency classes from the United States and Canada, and just last year to practicing clinicians from Europe (Figure 1).

[us_separator size=”small”][us_image image=”10568″ align=”center” ratio=”16×9″ size=”full”]
Figure 1. BostonSight’s educational scope, reach and growth over the last two decades.

It takes a village. Thanks to the generosity of BostonSight donors and individual sponsors like the John Henry Family Foundation, Contamac, Eaglet Eye, Tangible Science, OCULUS, and Glaukos Corporation, this year we are celebrating the 5th anniversary of FitAcademy for Cornea and Contact Lens residents. With its inauguration in 2019 (Figure 2), the hallmark of FitAcademy has always been to involve ophthalmology and external optometrists in its faculty and, in addition to an all-intensive didactic program, include a wet lab with real patients that have a variety of conditions across the entire complex corneal disease spectrum.  This model allows practitioners to see the didactic lessons come to life, and through lively discussions and first-hand evaluations of complex patients, enhance their experience and knowledge.

[us_separator size=”small”][us_image image=”10569″ align=”center”]
Figure 2. Inaugural FitAcademy for Cornea and Contact Lens residents and fellows – 2019.

Through participant surveys, we continue to strengthen and improve the program and have received phenomenal feedback after every FitAcademy – including our all-virtual program at the height of the pandemic in 2020 (Figure 3).  

[us_separator size=”small”][us_image image=”10571″ align=”center”]
Figure 3. Social media feedback from attendees after our all-virtual program at the height of the pandemic in 2020.

In 2021, we partnered with NECO who graciously agreed to host FitAcademy at their state-of-the-art Clinical Training Center. Here, practitioners enjoy the benefit of synchronous patient evaluations powered by ION cameras in all the slit-lamps and an area of group teaching and discussion. Practitioners also benefit from the tremendous expertise and depth of knowledge of the NECO faculty (Figure 4).

[us_separator size=”small”][us_image image=”10572″ align=”center”]
Figure 4. FitAcademy for Cornea and Contact Lens residents and fellows held at NECO’s Clinical Training Center and in partnership with NECO.

In the summer of 2022, we held our first FitAcademy International, in partnership with OptoAcademy®, an educational organization from Spain. Clinicians from Spain visited our BostonSight headquarters for a two-day program that combined didactic sessions, new patient consultations, patient comprehensive annual evaluations, new patient fittings, and ophthalmology consultations featuring a wide range of corneal diseases (i.e., Keratoglobus, Boston Keratoprosthesis Type 1, Steven’s Johnson Syndrome, Ocular Cicatricial Pemphigoid, and Graft versus Host Disease). Each day culminated with clinical grand round style discussions and practitioners benefitted from workshops in scleral lens edge modifications (Figure 5). After the tremendous feedback received from FitAcademy International, we are hosting our second iteration this summer, anticipating practitioners from Spain, Portugal, and Latin America.

[us_separator size=”small”][us_image image=”10573″ align=”center”]
Figure 5. Inaugural FitAcademy International for established practitioners held at BostonSight.

It is our goal to continue to carry out our mission by collaborating with global partners to further scleral lens education and the understanding of corneal disease management and co-management for both optometry and ophthalmology. Our 30+ years of experience with PROSE treatment working alongside cornea specialists has given us a unique perspective on the therapeutic benefits of scleral lenses for ocular surface disease. We have an opportunity to educate ophthalmologists in the hope they will adopt scleral lenses themselves, or refer more patients to their optometry colleagues, opening this treatment option to many patients who may otherwise miss the opportunity. 

Thomas Paine once said, “The mind once enlightened cannot again become dark”. FitAcademy programs not only mean to enlighten, but they prevent the mind from becoming dark and aim to turn darkness into light by developing ambassadors of sight. Our ultimate goal: that as many patients in the world that can benefit from scleral lenses, actually do so.

[us_separator show_line=”1″ size=”small”]
[us_image size=”us_600_600_crop” has_ratio=”1″ image=”9526″]

Dr. Karen G. Carrasquillo is Senior Vice President of Clinical and Professional Affairs at BostonSight. In addition, she is an adjunct clinical professor at the New England College of Optometry, an adjunct clinical professor at the school of optometry, MCPHS University, Advisory Board member for the Gas Permeable Lens Institute (GPLI), Fellow of the American Academy of Optometry (FAAO), Fellow of the Educational Society of Scleral Lenses (FSLS), Fellow of the British Contact Lens Association (FBCLA), and Global Ambassador of the BCLA. She is the founder and Program Chair of FitAcademy, an educational retreat in cornea and scleral lenses, and is also a planning committee member for the International Congress of Scleral Contacts (ICSC) Meeting and Global Ophthalmic Women (GLOW) meeting.

[us_separator size=”large”]
[us_separator size=”small” show_line=”1″]
[us_post_navigation in_same_term=”1″]
[us_sharing providers=”facebook,twitter,linkedin” align=”right”]
Tags: , , , , ,

Comfortable Customizing

[us_post_title]
[us_post_date]

The Future of Specialty Lenses

By Eef van der Worp

Comfortable Customizing

Never a dull moment in our industry. Although this past period will surely be remembered as ‘the COVID era’, there are so many new and exciting developments going on that maybe in the future, all of these technological advances may outweigh the negative vibes of COVID for our industry.

Customizing for Myopia

By far, the most potential in our field is in ‘upgrading’ myopia correction efficacy. Historically, we have always used standard ortho-k lens designs. But we can do better than that, it seems, and it has become increasingly obvious that with so many variables, it is hard to even get started on that without being dazzled. Let me try, though.­

The optics of the eye are more complex than many of us realise. For one, the aberrations of the eye change with age. Young children, kids in elementary school and young teens all have different aberration patterns. The higher-order optics of the eye change with pupil size too. Taking all of that into account can surely enhance and optimize the orthokeratology outcome. But it gets even more exciting if we go for the ‘full business class upgrade’ by measuring and applying individual aberration patterns. Everybody is different, and in fact, every eye is different. Understanding this and incorporating it into an individual lens for a specific patient may prove to be very efficacious.

A fascinating review paper by Rohan Huges and the research team at Queensland University of Technology in Brisbane (AU) states that HOAs are optical imperfections of the eye that alter retinal image quality despite optimal correction of spherical defocus and astigmatism. Because HOAs reduce retinal image quality and produce variations in optical vergence across the entrance pupil of the eye, they may provide optical signals that contribute to the regulation and modulation of eye growth and refractive error development. The magnitude and type of HOAs vary with age and refractive error and during near work and accommodation. Furthermore, distinctive changes in HOAs occur with various correction modalities, including, near addition spectacle lenses, ortho-k and soft multifocal and dual-focus contact lenses. In other words, there is work to do, but there surely is potential.

Customizing Corneals & Sclerals

If we look just at what eye care practitioners (ECPs) in my country (the Netherlands) do: by far, the majority of corneal GP lenses are not fitted with a trial set anymore. Sometimes it is still nice to have a trial lens available, to get a quick idea of the potential gain in visual acuity (especially on more challenging corneas). But from a fitting process point of view, the algorithms that the large manufacturers use to generate a lens based on corneal topography are so advanced, that only a very seasoned and experienced lens fitter with a lifetime of practical years under his or her belt could match that. But even then, it may be hard to beat the algorithm, let alone for a new ECP just coming out of school. This is a good thing: it means we are not fully reliant on the human factor anymore to fit corneal GPs going forward.

The advancement that scleral lens back surface designs have made in the last year or so has been amazing to watch. Early studies at Pacific University (US) already noted that the scleral surface on the anterior eye isn’t spherical at all – and that it increases in irregularity further out to the periphery. But now with two state-of-the-art profilometry instruments and the latest Scheimpflug instrument upgraded to measure scleral shape, toric and more complex scleral lens designs are now becoming the standard. 

There are various ways to fit these: you can use the scleral topography data to design the rotationally asymmetric scleral lens yourself using software, you can have the instrument with the incorporated software do the trick, or you could send the scleral topography file to the manufacturer to be processed and transformed into a lens – or a combination of the above. In addition, there is the impression-moulding technique for sclerals as the ultimate customized solution, if needed. All of this means, as with corneal GPs, that customization is becoming the norm with scleral lens designs.

Customizing Soft

Of all the specialty lenses, soft customized lenses may actually have the biggest potential. For starters: the bulk of all contact lenses fitted internationally are soft lenses – 86% according to the latest Eurolens Research Survey data. And – funny enough – we don’t fully understand this modality. 

Recent studies have shown what the normal eye looks like over a larger diameter (covering the area where a soft lens lands), while at the same time, more information about the overall sagittal height of the lenses that we fit daily has become available. Work by Graeme Young et al confirmed that soft lenses need to be fitted ‘somewhat steeper’ than the ocular surface in order to gain the desired ‘grip’ on the eye. In our terminology, we call this the δ-sag (delta-sag): the difference between the sagittal height of the ocular surface over a given area and the contact lens sagittal height, so the lens needs to bend or deflect to do so. 

This finally gives us more control over actually ‘fitting’ soft lenses again. But it also shows that any given soft lens on the eye has to bend or flex, to conform to the shape of the eye. The term used for this is the deflection factor. How much exactly is still up for debate, and in current lens wearers, this value varies quite a lot. This also means that the deflection in some lenses may be 100 microns, while in others it could be several hundreds of microns. What does that do to the optics of a lens? We don’t know that. In a standard -3.00D spherical lens design, it probably will not generate more than 0.25D change. But in more complex lens designs – e.g., toric or multifocal, this could prove to be more than trivial.

Understanding this, and then applying that to soft lenses – taking the individual and general characteristics regarding age and pupil size into account – could potentially have a huge impact. 

Educational Series & the Future

The educational grant over 2021, kindly supported by Contamac, has allowed me to provide generic specialty lens education for a better understanding of what we are actually doing with all these different specialty lens modalities and to potentially take advantage of all of the possibilities available to us.

Topics over the past year included mostly scleral lenses, corneal topography, scleral topography, soft lens fitting and myopia management. But what all of these have in common is the generalised potential to customize lenses and to take (more) advantage of the individual needs of the patient – whatever they may be.

The future looks bright for specialty lenses in my view. We just have to get a little bit more comfortable with customizing. I think we ‘get it’ now as an industry to a large degree when it comes to aligning the lens with the eye and respecting the ocular surface with various lens modalities. ‘Next up’ is understanding and applying optimal and advanced contact lens optics. Stay tuned. Even 3D printing options are being explored seriously now.

Thank you to Eef van der Worp for contributing to Global Insight.

[us_separator size=”small” show_line=”1″]
References:
Alam et al – 3D Printed Contact Lenses – ACS Biomaterial Sci Eng  – July 2021

Hughes et al – Higher order aberrations, refractive error development and myopia control: a review – Clin Exp Optom – January 2020
Janssen F – Size does matter – Contact Lens Inside (Dutch Contact Lens association contact lens magazine) – December 2021
Morgan P et al – International Contact Lens Prescribing 2021 – Contact Lens Spectrum – January 2022
Tomiyama et al Greater higher order aberrations induced by toric orthokeratology versus soft toric multifocal contact lens wear – Ophthalmic & Physiological Optics – June 2021
Van der Worp – Variation in sag values in daily disposable, reusable and toric soft contact lenses in the journal – Contact Lens and Anterior Eye – December 2021

 

[us_separator size=”small” show_line=”1″]
[us_image has_ratio=”1″ image=”9904″ size=”us_600_600_crop” ratio=”3×4″]

Eef van der Worp is an educator and researcher. He received his optometry degree from the Hogeschool van Utrecht in the Netherlands (NL) and has served as a head of the contact lens department at the school for over eight years. Eef received his PhD from the University of Maastricht (NL) in 2008. He now runs his own research & education consultancy ‘Eye-Contact-Lens’ which is based in Amsterdam (NL). He is a fellow of the AAO, BCLA and the SLS, a lifetime fellow of IACLE and an honorary life member of ANVC. He is on the education committee for the GSLS and the OVN.  Eef is adjunct assistant Professor at Pacific University College of Optometry (Oregon, USA), and adjunct Professor at the University of Montreal University College of Optometry (CA) and he is lecturing extensively worldwide and is a guest lecturer at a number of Universities in the US and Europe.

[us_separator size=”small” show_line=”1″][us_separator size=”small”]
[us_post_navigation in_same_term=”1″]
[us_sharing providers=”facebook,twitter,linkedin” align=”right”]
Tags: , , , , ,